CM45002 Part of Clarostat Sensors And Controls (CAGE Code 12697) with NSN 5905012343061 - Quote Now

Part Number: CM45002

Manufacturer: Clarostat Sensors And Controls

NSN: 5905-01-234-3061

NIIN: 012343061

Item Name : Resistor Variable Nonwire Wound

CAGE Code: 12697

FSC: 5905 Resistors

FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 01

NSN Delivery is your one-stop shop for all the CM45002 Resistor Variable Nonwire Wound products you require that fall under the NSN 5905-01-234-3061, including those like part number CM45002 from Clarostat Sensors And Controls (CAGE Code 12697) (NIIN 012343061). If you are interested in this particular listing, be sure to fill out and submit the RFQ form provided on this page so that you may receive a competitive quote for your comparisons.

To guarantee a solution that meets your unique needs and constraints, we ask that you present us with crucial data like your target price and expected shipping time frame. Once we receive a review of such details, a member of our staff will personally reach out to you in 15 minutes or less to continue the purchasing process.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To make the search for NSN products as simple as possible, we organize our inventory in various ways where you can narrow down results based on a number of parameters. For example, while this product is manufactured by Clarostat Sensors And Controls, it was specifically produced under the CAGE Code 12697. Additionally, with the NSN 5905-01-234-3061, one can also know that this product belongs to the Federal Supply Class (FSC) 5905 Resistors.

As such, ensuring that you only procure the exact item you need is made easy. If you are ready to begin, submit a quote request today or give us a call or email at your earliest convenience! We look forward to serving you.

NSN Information for Part Number CM45002 with NSN 5905-01-234-3061, 5905012343061

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-01-234-3061 Item Description: RESISTOR,VARIABLE,NONWIRE WOUND,	5905	012343061	0	N	B
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		B	A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
CM45002	2	2	3

Characteristics Data of NSN 5905-01-234-3061, 5905012343061

MRC	Criteria	Characteristic
ABNC	FLAT HEIGHT	0.220 INCHES MAXIMUM
AJYN	SCREW THREAD DIAMETER	0.375 INCHES NOMINAL
AJYP	SCREW THREAD SERIES DESIGNATOR	UNEF
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	2.0 FREE AIR SINGLE SECTION
ADAV	III OVERALL DIAMETER	1.094 INCHES NOMINAL
CSDL	STANDARD TAPER CURVE PER SECTION	A SINGLE SECTION
SR-1	SPEC/STD CONTROLLING DATA
SR-1	MFR SOURCE CONTROLLING REFERENCE	380-10035-503
APXH	TERMINAL LOCATION	REAR-BOTTOM
ABHP	III OVERALL LENGTH	1.941 INCHES NOMINAL
CBME	III CUBIC MEASURE	1.824 CUBIC INCHES
AEDX	SHAFT STYLE	ROUND, FLATTED
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	120.0 SINGLE SECTION
AEEA	SWITCH TYPE	ROTARY
AEED	SWITCH VOLTAGE RATING IN VOLTS	117.0
ABPM	BODY DIAMETER	1.094 INCHES NOMINAL
AEDZ	SHAFT BEARING TYPE	SLEEVE
ABXF	SHAFT LENGTH	0.910 INCHES NOMINAL
AEGJ	SWITCH CONTACT ARRANGEMENT	SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED
AFJN	III FRAGILITY FACTOR	MODERATELY RUGGED
ZZZK	SPECIFICATION/STANDARD DATA	82918-380-10035 MANUFACTURERS SOURCE CONTROL
TEST	TEST DATA DOCUMENT	82918-380-10035 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
AAQL	BODY STYLE	CYLINDRICAL BUSHING MOUNTED
AEFD	ACTUATOR TYPE	SINGLE SHAFT
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	STOPS
CBBL	FEATURES PROVIDED	PANEL SEAL AND SHAFT SEAL AND SWITCH
AEFK	MAXIMUM STARTING TORQUE	4.00 INCH-OUNCES
AEFL	MAXIMUM RUNNING TORQUE	4.00 INCH-OUNCES
ABNB	FIRST FLAT LENGTH	0.438 INCHES MINIMUM
AEFM	MAXIMUM STOP TORQUE	12.00 INCH-OUNCES
AEFP	NONTURN DEVICE RADIUS	0.531 INCHES NOMINAL
AEFN	NONTURN DEVICE LOCATION	AT 9 OCLOCK
ABWV	SHAFT DIAMETER	0.251 INCHES MAXIMUM
AEGH	SWITCH OPERATING POSITION	START OF ROTATION
AAPN	SECTION QUANTITY	1
ADAP	MOUNTING BUSHING LENGTH	0.375 INCHES NOMINAL
AXGY	MOUNTING METHOD	STANDARD BUSHING
AJYQ	SCREW THREAD QUANTITY PER INCH	32.0
CSDK	SWITCH CURRENT TYPE AND RATING IN AMPS	3.000 AC
TTQY	TERMINAL TYPE AND QUANTITY	5 TAB, SOLDER LUG
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	340.0 MAXIMUM
ADAQ	BODY LENGTH	0.828 INCHES NOMINAL
CQDB	RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT	-3.0 TO 0.0 -55 DEG CELSIUS SINGLE SECTION AND -5.0 TO 10.0 -25 DEG CELSIUS SINGLE SECTION AND -5.0 TO 10.0 25 DEG CELSIUS SINGLE SECTION AND 0.0 TO 3.0 120 DEG CELSIUS SINGLE SECTION
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION
SR-1	MANUFACTURERS CODE	82918